TIPS & TRICKS - ENSURING A SMOOTH NEW SHOWER UNIT INSTALLATION

Tips & Tricks - Ensuring A Smooth New Shower Unit Installation

Tips & Tricks - Ensuring A Smooth New Shower Unit Installation

Blog Article

Get A Free Estimate



Just about every person will have their own individual thinking in relation to How to Install a One-Piece Shower Unit.


How to Install a One-Piece Shower Unit
A successful shower setup requires cautious planning as well as a lot of job. In most cases, you will require to do three sorts of tasks: mounting walls, installing the plumbing, and also finishing wall surfaces.

Prep work


Firstly, you need to decide on the kind of shower that you desire to install. It is essential to identify whether the picked shower is capable of handling certain systems and can manage a safe level of water via the boiler. Most shower systems nowadays are designed to be versatile to various water pressures (such as stored warm water and also cold keys).
It is additionally important to take into consideration the water pressure and the preparation of the piping and also drainage for the shower

Different Sorts Of Shower Units


  • Push-on Mixer: The hose as well as spray parts of the push-on mixer shower system can be attached to the bath tap based on your need, and the water temperature can be changed using the taps. Push-on mixers are cheap as well as very basic to mount. Nonetheless, although the hose connection is basic, it is conveniently dislodged. Additionally, it is troublesome to change the temperature level.

  • Bath/Shower Mixer: The tube and spray of this type of shower are integrated with a bathroom mixer faucet, and also the temperature level can be readjusted through the bath taps. It is an extremely economical alternative and no extra plumbing is involved. Nevertheless, the bath/shower mixers likewise experience troublesome temperature control choices.

  • Handbook Mixer: The pipe and also spray of a hand-operated mixer shower device belong of the wall surface device and also the cold and hot water products are attached to a solitary shutoff The temperature level and also stress of the water are regulated via either one or a selection of handles (in a lot more pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are more expensive than the previously discussed mixers. They likewise need additional plumbing of hot and cold supply of water pipes.

  • Thermostatic Mixer: The hose pipe as well as spray of this shower type are a part of the wall system as well as the cold and hot water materials are linked to a solitary shutoff here too. It is complete with a built-in stabiliser to self-adjust the water temperature and to prevent it from becoming too warm. Among the largest benefits of a thermostatic mixer shower kind consists of practical temperature control. Nevertheless, it is the most pricey of the various mixer choices.

  • Power Shower: A power shower is a single device having an effective electric pump that can modifying both the water pressure and temperature level. This type of shower can be fitted if there is water supply from a cold water tank as well as a hot water cyndrical tube. A power shower makes the modification of both pressure and also temperature level easy. On the other hand, it disagrees for water heated up directly by the shower or where the water is provided by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and it warms the water electrically. It is very important to keep in mind that for this shower kind to be installed, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The system allows the temperature level as well as pressure to be changed via a handle. Designs with temperature level stabilisers are better as they remain untouched by other faucets elsewhere being used within the household. A significant drawback of electrical showers is that the control knob just allows for the alternative of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter when the spray is typically weak and the mains water is cooler. Nevertheless, this trouble is dealt with in some designs which are readily available with a winter/summer setting.


  • Approach


    Depending upon the sort of shower you want to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it must have a check shutoff.
    Before beginning, it is recommended to note the settings of the shower head and also control, as well as to intend the pipe-work included. In addition, the drainage system to get rid of the waste water will certainly need to be prepared. Both positions of the cable television course as well as the shower button will additionally need to be thought about if a rapid or electric shower device is being installed.
    Utilize the instruction guide given with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water system. In order to protect the pipes, they must be given a water resistant covering as well as additionally fitted with isolating valves. The pipelines can then be buried right into the wall surface and glued over to neaten the total look.
    Fit the base tray, shower head, as well as installations.
    Attach the main shower control to the pipelines that will certainly be supplying the water (This may need a women screw thread adapter).
    Reconnect the supply of water as well as examination the pipelines for any kind of leaks, as some may require firm.
    If you are installing an electrical shower, keep in mind to turn off the electricity supply prior to making any electrical links. When these links have been made (there must be advice within the user's manual), the power supply can be switched back on.

    Adjusting Water Pressure to Fit Your Shower


    The cold water tank can be raised to a better height (sometimes as little as 150mm (6inches)) by fitting a strong wooden assistance underneath it - perhaps made up of struts and also blockboards. If you choose this option, the main and distribution pipes will likewise need to be increased to satisfy the brand-new elevation of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached into the power supply in order to run.

    Piping as well as Drain


    It is best to use 15mm diameter supply pipelines, and also make the go to the shower as short and straight as possible so regarding keep optimal pressure and minimise warmth loss. Furthermore, by minimising making use of joints for pipeline corners, you can decrease the resistance in the circulation of the water system. You can accomplish this by bending the pipes rather.

    A Lot Of Typical Mistakes


  • Going against or overlooking local code restrictions.

  • Making use of pipelines that are too tiny.

  • Affixing copper to galvanized without utilizing a brass or dielectric fitting between the two.

  • Not making use of tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not mounting an air space filling up for fixtures.

  • Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall surface is in place.

  • Not properly straightening tubes into fittings or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leakage.).

  • When transforming the water back on in your home, constantly run the outdoors hose pipe valve or purge your bathrooms to bleed dust as well as air from the lines. This debris can trigger problems in your sink taps and various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a One-Piece Shower Unit

    I'm very excited about How to Install a Shower Enclosure and I am praying you enjoyed reading our blog posting. Sharing is caring. You never know, you might be doing someone a favor. We love reading our article about How to Install a Direct-to-Stud Shower Enclosure.




    Book Service


    Report this page